Back to Blog
Tips & Care 2026-11-15 Surebeauty Official Site 11 views

6-in-1 80K Cavitation Machine: Plan a Body Contouring Session

6-in-1 80K Cavitation Machine: Plan a Body Contouring Session

Build a practical body contouring session plan around the 6-in-1 80K cavitation machine's five handpieces, supported uses, and honest limits.

Start with the handpieces, not the clock

The 6 In 1 80K Cavitation Machine With Vacuum Radiofrequency For Body Contouring gives you five treatment tools: an 80K cavitation handle, a bipolar vacuum and RF handle, a 6-polar RF handle, a 4-polar RF handle, a 3-polar RF handle, and lipo laser pads. Before you plan a session, match each tool to the job the catalog describes. That keeps your plan grounded in what the machine is actually built to do.

The catalog does not supply a session length, a treatment frequency, or a step-by-step operating sequence. Those are the first limits of this guide. What follows is a planning framework based only on the supplied descriptions, so you can decide which handpiece belongs in a session and which claims to avoid.

Match each handpiece to its supported role

Use this list to assign tools to body areas. It reflects the catalog wording, not a manufacturer protocol.

  • 80K cavitation handle: The catalog says this handle targets stubborn body parts such as the abdomen and thighs with 80 kHz ultrasonic waves. It is the body-focused starting point in a contouring plan.
  • Bipolar vacuum and RF handle: The record describes this handle as promoting circulation and lifting and firming skin. The vacuum feature is said to massage the skin and support fluid flow, while RF is said to tighten and lift.
  • 6-polar RF handle: This handle is described as tightening and lifting skin on body areas such as the belly. The catalog presents it as a complement to cavitation and vacuum work.
  • 4-polar RF handle: The 4-polar handpiece is described for tightening and lifting skin on the face and neck and for increasing skin elasticity.
  • 3-polar RF handle: The 3-polar handle is described mainly for the eye area, including eye bags, dark circles, and fine lines.
  • Lipo laser pads: The pads are described as firming skin and sculpting the body. The catalog says they use red laser light and are simple, safe, and painless, but it does not specify pad placement or session duration.

Build a session around body and face, not one long pass

A practical body contouring session plan separates body work from facial work. Start with the body tools if that is the client's goal: the 80K cavitation handle for localized areas such as the abdomen or thighs, then the vacuum and RF handle or the 6-polar RF handle for the tightening and firming step the catalog describes. Keep facial RF work, such as the 4-polar and 3-polar handles, in a separate part of the plan so you are not blending eye-area and body-area steps without a stated protocol.

The catalog does not confirm how long each handpiece should stay on an area, how many passes to make, or how often to repeat a session. Do not invent those numbers. Instead, write your plan with placeholders for time and frequency, and fill them only after you have a protocol from your training or the manufacturer's full documentation. If you are testing the machine for the first time, treat the first session as a familiarization run with the touch screen and handpieces rather than a full treatment.

What the machine record confirms

Set checkpoints the record actually supports

The catalog gives you equipment facts, not a treatment timeline. Use these checkpoints to keep a session plan honest: confirm the handpiece matches the area before you start; confirm the client understands which steps are body-focused and which are facial; and confirm you have a way to stop if the client reports discomfort. The record does not state a warm-up time, a maximum session length, or a required rest period between sessions.

For cavitation treatment frequency, the supplied information does not confirm a schedule. Do not promise a specific number of sessions per week or a result timeline. Instead, tell clients that frequency depends on a protocol you will confirm outside this catalog, and that the machine's role is to provide the handpieces for the steps you are trained to perform.

Aftercare: what the catalog does and does not cover

Ultrasonic cavitation aftercare is not detailed in the supplied record. The catalog mentions that the vacuum feature supports circulation and metabolism and that the lipo laser pads are described as painless, but it does not list post-session instructions such as hydration, skin checks, or activity restrictions. Do not fill that gap with generic advice presented as a manufacturer rule.

A safe aftercare plan starts with what you can observe: check the treated area for unusual redness or discomfort, ask the client how the area feels before they leave, and schedule a follow-up conversation rather than promising a result. If your insurer or training provider requires written aftercare, source it from them, not from this product page.

Plan around the machine's physical footprint

The main machine measures 14.2 x 15.7 x 14.9 in. (36 x 40 x 38 cm) and weighs 12.8 lb. (5.8 kg) net. The package measures 12.2 x 16.5 x 11.4 in. (31 x 42 x 29 cm) and weighs 15.9 lb. (7.2 kg) gross. Those dimensions matter for a treatment room because you need space for the machine, the handpieces, and the client. The record lists the input voltage as AC 110 V - 220 V, 50 Hz - 60 Hz, which is worth checking against your room's supply before you book a session.

Noise level is listed as less than 60 dB at 30 cm away. That is a useful planning detail if you work in a shared space, but it is not a promise about every handpiece in every room.

Specifications that affect session setup

Where the 6-in-1 fits, and where it does not

This machine suits a practitioner who wants multiple handpieces in one unit for body and facial contouring steps described in the catalog. It is not a substitute for a complete treatment protocol. If you need a machine with published session times, a confirmed frequency schedule, or detailed aftercare instructions in the product record, this listing does not provide them. Buy it for the handpiece set and the touch-screen operation, and plan to source the clinical protocol separately.

At a catalog price of USD 209.30 compared with a comparison price of USD 299.00, the 6-in-1 is positioned as a multi-handpiece option. Whether that value holds depends on how many of the five handpieces you will actually use in your planned sessions. If you only need body cavitation, a simpler unit may be easier to plan around; if you want both body and facial steps in one footprint, this machine's handpiece range is the reason to consider it.

Related Articles

Customer Service
Home
Products
Cart
Profile